Does running MEMMAKER work?
Action:
NOTE: Before running MEMMAKER, edit the AUTOEXEC.BAT and CONFIG.SYS files and 'REM' (remark) out TSRs and devices. (Windows 95 often does not even need the AUTOEXEC.BAT and CONFIG.SYS files.)
1) Run MemMaker to optimize memory:
a) Enter MEMMAKER at the DOS prompt.
b) Select 'Express Setup'. (Unless the user is very experienced in memory management).
c) When asked if any programs require expanded memory (EMS) answer Yes or No (usually No).
d) Wait for MemMaker to perform as follows, and press ENTER to proceed:
1] MemMaker will reboot the PC.
2] MemMaker analyzes the system to determine optimum memory setup.
3] MemMaker rewrites the AUTOEXEC.BAT and CONFIG.SYS files.
4] MemMaker reboots the system again.
e) MemMaker asks if system is working properly:
1] Select Yes by pressing ENTER, if no error messages were displayed and system appears to be working properly.
2] Select No by pressing 'Spacebar' if system is not functioning properly. Follow instructions on screen to have MemMaker then try some additional setup changes.
2) Run Windows Setup again.
Question:
Does running MEMMAKER work?
Responses:
Yes, MEMMAKER works
No, MEMMAKER does not work
